Rotor Pump And Emulsifier Mixer
250L cosmetic cream liquid detergent vacuum mixer homogenizer emulsifier machine
  • FEATURES
  • PARAMETER
  • CONFIGURATION
  • APPLY

This machine consists of: oil tank, water tank, vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, electric lifting system, operation control cabinet, piping system. It is the most suitable equipment to produce high-grade skin care creams or other creams products.

Oil tank capacity 130L; water tank capacity 130L; primary pot capacity 250L, working volume 200L; limiting vacuum -0.09MPa.

Size: Complete machine: 2600mm×1900mm×2500-3500mm Oil and water tank: 1800mm×800mm×1200mm

Material: 304 stainless steel. Inner wall, jacket, outer layer all made by 304 stainless steel, inner and outer are polished, the surface handled by special light treatment.

Oil tank and water tank are both double deck, inner wall thickness 4mm, middle and outer thickness 4mm.

Heating system: i nterlayer electric heating power 6KW, the outer layer covers by asbestos to insulate heat, reducing heat lost and avoiding scalding employees.

Mixing system:  both toil tank and water tank assemble disperser of 0.75KW, to make the water and oil heated more quickly and evenly.

Vacuum Emulsifying pot:  made of three decks 304 stainless steel. Interlayer thickness 4mm, middle layer thickness 4mm, outer layer thickness 3mm, special light treatment The homogenizer is on the top of the emulsifying pot, adjustable time setting depends on the product homogenization need, voltage 380V, power 4KW, made in Shanghai and uses German technology, the highest speed 2800 r / min. The material moves in a high speed between the rotor and stator, what can engender a strong hydraulic shear power to dispersing materials, meanwhile it can engender  centrifugal power to extrude, milling, crash the material, ultimately make the material mixing, stirring, diminution to the desired requirements. A lighting hole on the pot cover to observe the states of homogeneity. Entrance for spots of material provide possibility to add essence and suchlike materials. Either pour-out the material by tilting the pot or from the bottom, the latter way can make the materials enter the filling machine directly for quantitative filling. Easy to clean.

Vacuum system: voltage 380V, power 1.1KW, materials in water tank and oil tank are absorbed into the primary pot in vacuum. The  rotary-vane pump is made by Haibo Kang Company in Shanghai, which can remove the air bubble to improve the homogenizing effect.(circulating cooling by water)

Mixing system:  voltage 380V, power 2.2KW, 10-120 r / min. Monitoring with transparent filter, scraping the interlayer when mixing, frequency control.

Heating system:  8KW electric heating device attaching at the bottom. Heating with temperature display, easy to control.

Electric lifting:  voltage 380V, power 1.1KW. Lifting is easy to operate, so the material can be effectively emulsified in a closed condition.

Control System:  The control system is equipped with digital time relay device, so it can adjust time and speed of homogenizer based on different material. All control buttons are concentrated together,clear at a glance.

Device Name

250L Emulsifying Machine

Working ability

Design volume: 250L

 

Working volume:200L

 

Minimum operating volume: 80L

Material

Contact Parts: 304 stainless steel thickness: 4mm

 

Interlayer: 304 stainless steel thickness: 4mm

 

Outer layer: 3 04 stainless steel thickness: 3mm

Weight

1200kg

Size

2600mm×1900mm×2500-3500 mm

Service life

10 years

Stirring

Fixed paddle stirring, PE blade Scraping

Homogenizer

Power: 4KW

 

Motor speed: 2800r/min

 

Particle size: 0.2-0.6um

Uncapping

Electric lift

Heating

Electric heating

Discharge

Tilt pot discharge and bottom valve discharge

Process parameters

Working pressure: -0.09MPa

Flimsy parts

1 year renewal except artificial

Warranty period

1 year

Water Pot 

Device Name

250L water pot

Working ability

Design volume: 130L

Working volume: 100L

Stirring

Blades stirring

Mixing Power: 0.75KW

Speed: 150r/min

Uncapping

Removeable uncapping

Temperature display

Digital Temperature display

Discharge

Bottom absorbing discharge

Process parameters

Working pressure: -0.09MPa

Material

Contact segment: 304 stainless steel thickness: 3mm

Outer layer: 304 stainless steel thickness: 3mm


Oil Pot 

Device Name

5L oil pot

Design capacity

Design volume: 5L

Working volume: 4L

Stirring

Blades stirring

Mixing Power: 60W

Speed: 200r/min

Uncapping

Removeable uncapping

Temperature display

Digital temperature display

Discharge

Bottom absorbing discharge

Process parameters

Jacket working pressure: -0.3MPa

Material

Contact segment: 304 stainless steel thickness: 4mm

Outer layer: 304 stainless steel thickness: 4mm

Filling Machine
Contant Us